Sustainable biocomposites based on Mater-Bi and grape pomace for a circular economy: Performance evaluation and degradation in soil

• GP analysis showed only a slight decrease of antioxidant potency due to heat treatment. • Biowaste filler induced a proportional increase of antioxidant property in the BioCs. • GP caused a slight increase in the Elastic Modulus more pronounced with 20 % addition. • Degradation rate in soil increased with the filler content and time. • Terephthalic mol% in PBAT increased in the recovered MB sample after soil degradation. Biodegradable polymers often exhibit inferior properties and higher cost compared to their fossil-derived counterparts. The addition of plant waste and by-products can improve their performances, providing in the meantime functional activity and reducing their cost. In this work, we summarize the preparation of different biocomposites (BioCs) incorporating two diverse amounts (10 % and 20 %) of grape pomace (GP) in a Mater-Bi (MB) sample. GP, MB as well as BioCs were fully characterized. The influence of addition of GP on the properties and degradation in soil of the biocomposites was evaluated in comparison with the neat MB. However, natural antioxidants and other active compounds from GP could be sensitive to temperature. Thus, GP and MB underwent heat treatment at 180 °C to simulate and induce possible degradation during BioCs processing. GP analysis (particle size 50 μm) showed only a slight decrease of antioxidant potency, despite the heat treatment simulating the BioCs processing. 1 H NMR of the MB soluble fraction in CDCl 3 displayed the presence of two polymeric components: polylactide (PLA) and poly(butylene adipate- co -butylene terephthalate) (PBAT). Introduction of GP in the polymer matrix induced a proportional increase of antioxidant property in the BioCs as well as in complex viscosity at low frequencies. Moreover, a slight increase in the elastic modulus was observed with increasing the crystallinity of the samples. Degradation rate in soil, monitored by weight loss, increased with filler content and time. Moreover, NMR showed that, in the recovered sample after 45 days, the composition of PBAT changed, with the terephthalic percentage increased.

Authors

Institutions

Publication Details

Journal
Polymer Degradation and Stability
Published
2024-11-15
DOI
https://doi.org/10.1016/j.polymdegradstab.2024.111091
Citations
11
Primary Topic
biodegradable polymer synthesis and properties
Type
article
Field-Weighted Citation Impact
1.91

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Sustainable biocomposites based on Mater-Bi and grape pomace for a circular economy: Performance evaluation and degradation in soil

Luana Pulvirenti, Luigi Botta, Maria Chiara Mistretta, Giuseppe Impallomeni et al.
11 citations
Polymer Degradation and Stability
biodegradable polymer synthesis and properties
1.91
article

Sustainable biocomposites based on Mater-Bi and grape pomace for a circular economy: Performance evaluation and degradation in soil

Luana Pulvirenti, Luigi Botta, Maria Chiara Mistretta, Giuseppe Impallomeni, Vincenzo Titone, Marco Rapisarda, Edoardo Napoli, Paola Rizzarelli
article en
11 citations

Abstract

• GP analysis showed only a slight decrease of antioxidant potency due to heat treatment. • Biowaste filler induced a proportional increase of antioxidant property in the BioCs. • GP caused a slight increase in the Elastic Modulus more pronounced with 20 % addition. • Degradation rate in soil increased with the filler content and time. • Terephthalic mol% in PBAT increased in the recovered MB sample after soil degradation. Biodegradable polymers often exhibit inferior properties and higher cost compared to their fossil-derived counterparts. The addition of plant waste and by-products can improve their performances, providing in the meantime functional activity and reducing their cost. In this work, we summarize the preparation of different biocomposites (BioCs) incorporating two diverse amounts (10 % and 20 %) of grape pomace (GP) in a Mater-Bi (MB) sample. GP, MB as well as BioCs were fully characterized. The influence of addition of GP on the properties and degradation in soil of the biocomposites was evaluated in comparison with the neat MB. However, natural antioxidants and other active compounds from GP could be sensitive to temperature. Thus, GP and MB underwent heat treatment at 180 °C to simulate and induce possible degradation during BioCs processing. GP analysis (particle size 50 μm) showed only a slight decrease of antioxidant potency, despite the heat treatment simulating the BioCs processing. 1 H NMR of the MB soluble fraction in CDCl 3 displayed the presence of two polymeric components: polylactide (PLA) and poly(butylene adipate- co -butylene terephthalate) (PBAT). Introduction of GP in the polymer matrix induced a proportional increase of antioxidant property in the BioCs as well as in complex viscosity at low frequencies. Moreover, a slight increase in the elastic modulus was observed with increasing the crystallinity of the samples. Degradation rate in soil, monitored by weight loss, increased with filler content and time. Moreover, NMR showed that, in the recovered sample after 45 days, the composition of PBAT changed, with the terephthalic percentage increased.

Polymer Degradation and StabilityVol. 231
National Research Council (IT), National Interuniversity Consortium of Materials Science and Technology (IT), Institute of Polymers, Composites and Biomaterials (IT), University of Palermo (IT)
European Commission
Openalex Percentile: Top 15%
biodegradable polymer synthesis and properties
1.91
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.