Flattening behaviour of weft-knitted spacer fabrics

Abstract Weft-knitted spacer fabrics are thick 3D knitted structures prized for their cushioning properties which have gathered increasing attention in the last decade. The thickness of a spacer fabric is one of its most influential parameters and strongly impacts its cushioning properties, wearability, thermal insulation or permeability. However, the fabric's natural undulation and high deformability make its thickness measurement uneasy. The current standard measurement methods require to measure the fabric thickness after compressing it until a fixed threshold stress value is reached to flatten it. The diversity of these threshold values is confusing, and each of them is unsuitable to variety of fabric rigidity. In this article, a standard for thickness evaluation was proposed and used to measure the thickness of 20 samples knitted with 5 independent parameters. The measured thickness was compared to the thickness measured at a threshold value of 1 kPa and to a theoretical thickness. The proposed measurement standard was proved reproducible and efficient for all fabrics when the threshold measures showed large errors on the softer and stiffer samples. The flattening stress of the fabrics ranged from 86 to 5262 Pa and could not be approximated by a single standard value. The theoretical thickness was more accurate, predicting the thickness with an average error of 3.8%.