Antiseptic Surface Based on Antibacterial Polyethylene Composites with Silver Fillers: Stability in Aqueous Solution

One method to reduce the spread of pathogens is to use clean surfaces. These have long-acting components, and their use would reduce the massive consumption of disinfectants and cleaning products. In order to ensure the safety of these surfaces in water-based systems and prevent mishandling and potential health and environmental risks, this study analyzed the stability of clean surfaces made of polyethylene with three silver compounds with different water solubility. The surfaces were subjected to erosion at 40 °C by immersing them in aqueous solutions of 3% acetic acid (<i>w</i>/<i>v</i>), 50% ethanol (<i>v</i>/<i>v</i>), and deionized water. The ionic silver release was monitored in real-time in situ via voltammetry using an Ag/S^2- electrode. Analytical methods such as Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) were employed to elucidate the surface alteration. The plastic residue after immersion varied depending on the pH and the type of solvent used, with a higher plastic migration observed when in contact with the water-ethanol mixture. Furthermore, a correlation was identified between surface stability, oxygen composition in the antibacterial, and water solubility, influencing increased surface oxidation.