The Influence of the Amount of Technological Waste on the Performance Properties of Fibrous Polymer Composites

The objective of the experimental analysis was to assess the impact of the reuse of technological waste (recyclate) on the selected performance properties of the fibrous polymer composite used to produce components for the automotive industry by injection molding technology. Polyphthalamide (PPA), which belongs to a group of high-tech polymers, was chosen as the analyzed material. In accordance with the set goals, the rheological, mechanical, and structural properties of the material were evaluated using ANOVA analysis in the experimental part of the work, depending on the mass ratio of the recycled material added to the virgin material. The influence of the proportion of recycled material on the lifetime of moldings by the method of their exposure at an elevated temperature for a defined time was also assessed. During the research, it was found that at a concentration of up to 40 wt. % of recyclate, its mechanical properties do not change significantly. At a concentration of 50 wt. %, there is a rapid decrease in mechanical properties. In the long term, it can also be said that the addition of recyclate significantly affects the service life of the components. No significant changes in morphology were observed during the analysis of structural properties.