Mimicking osteoid 3D porous dense microfiber silk fibroin embedded poly(vinyl alcohol) scaffold for alveolar ridge preservation

Alveolar ridge loss presents difficulties for implant placement and stability. To address this, alveolar ridge preservation (ARP) is required to maintain bone and avoid the need for ridge augmentation using socket grafting. In this study, a scaffold for ARP was created by fabricating a 3D porous dense microfiber silk fibroin (mSF) embedded in poly(vinyl alcohol) (PVA), which mimics the osteoid template. The research utilized a freeze-thawing technique to create a mimicked osteoid 3D porous scaffold by incorporating different amounts of mSF into the PVA, namely, 1%, 3%, 5% and 7%. Subsequently, a 3D profilometer machine and a scanning electron microscope were employed to examine the morphology and size of the mSF and the mimicked osteoid 3D porous scaffold in all groups. Thermal characteristics and crystalline structure were analyzed before assessing the water contact angle, swelling behavior, degradation and mechanical properties. The experiment evaluated the biological performance of the mimicked osteoid 3D porous scaffold by examining the efficacy of osteoblast cell adhesion, proliferation, viability, protein synthesis, alkaline phosphatase (ALP) activity and calcium synthesis. Finally, the ability of osteoblast cells to regulate the osteoid matrix deposition on the osteoid 3D porous scaffold was assessed by mimicking the dynamic bone environment using rat mesenchymal stem cells. The findings suggest that incorporating mSF into PVA enhances the interconnective pore size, crystalline structure and thermal behavior of the mimicked osteoid 3D porous scaffold. The hydrophilicity of PVA decreased with an increase in the proportion of mSF, while a higher proportion of mSF resulted in increased swelling and mechanical characteristics. Incorporating a greater proportion of mSF, specifically 5% and 7%, led to a reduced rate of degradation. The addition of 5% mSF to the PVA 3D porous scaffold resulted in remarkable biological properties and excellent osteoconductive activity.

Authors

Institutions

Publication Details

Journal
Regenerative Biomaterials
Published
2024-11-13
DOI
https://doi.org/10.1093/rb/rbae130
Citations
4
Primary Topic
Silk-based biomaterials and applications
Type
article
Field-Weighted Citation Impact
0.69

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Mimicking osteoid 3D porous dense microfiber silk fibroin embedded poly(vinyl alcohol) scaffold for alveolar ridge preservation

Kanokporn Santavalimp, Perumal Ramesh Kannan, Nuttawut Thuaksuban, Jirut Meesane et al.
4 citations
Regenerative Biomaterials
Silk-based biomaterials and applications
0.69
article

Mimicking osteoid 3D porous dense microfiber silk fibroin embedded poly(vinyl alcohol) scaffold for alveolar ridge preservation

Kanokporn Santavalimp, Perumal Ramesh Kannan, Nuttawut Thuaksuban, Jirut Meesane, Supaporn Sangkert, Jutharat Phongthanawarakun, Walaiporn Promkaew, Wachiratan Anupan
article en
4 citations

Abstract

Alveolar ridge loss presents difficulties for implant placement and stability. To address this, alveolar ridge preservation (ARP) is required to maintain bone and avoid the need for ridge augmentation using socket grafting. In this study, a scaffold for ARP was created by fabricating a 3D porous dense microfiber silk fibroin (mSF) embedded in poly(vinyl alcohol) (PVA), which mimics the osteoid template. The research utilized a freeze-thawing technique to create a mimicked osteoid 3D porous scaffold by incorporating different amounts of mSF into the PVA, namely, 1%, 3%, 5% and 7%. Subsequently, a 3D profilometer machine and a scanning electron microscope were employed to examine the morphology and size of the mSF and the mimicked osteoid 3D porous scaffold in all groups. Thermal characteristics and crystalline structure were analyzed before assessing the water contact angle, swelling behavior, degradation and mechanical properties. The experiment evaluated the biological performance of the mimicked osteoid 3D porous scaffold by examining the efficacy of osteoblast cell adhesion, proliferation, viability, protein synthesis, alkaline phosphatase (ALP) activity and calcium synthesis. Finally, the ability of osteoblast cells to regulate the osteoid matrix deposition on the osteoid 3D porous scaffold was assessed by mimicking the dynamic bone environment using rat mesenchymal stem cells. The findings suggest that incorporating mSF into PVA enhances the interconnective pore size, crystalline structure and thermal behavior of the mimicked osteoid 3D porous scaffold. The hydrophilicity of PVA decreased with an increase in the proportion of mSF, while a higher proportion of mSF resulted in increased swelling and mechanical characteristics. Incorporating a greater proportion of mSF, specifically 5% and 7%, led to a reduced rate of degradation. The addition of 5% mSF to the PVA 3D porous scaffold resulted in remarkable biological properties and excellent osteoconductive activity.

Regenerative BiomaterialsVol. 12
Prince of Songkla University (TH), Zhejiang Sci-Tech University (CN)
Prince of Songkla University
Openalex Percentile: Top 33%
Silk-based biomaterials and applications
0.69
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.