Effect of Hydrate Saturation on Triaxial Shear Mechanical Properties of Methane Hydrate-Bearing Sediment

Abstract As a clean energy source, natural gas hydrate resources are essential to the development of energy in the twenty-first century. However, the degree of consolidation of the hydrate reservoir is low, and complex accidents such as wellbore instability, reservoir collapse, and gas production leakage will be caused if improperly exploited. The laboratory employs a self-developed triaxial shear test equipment that operates under high pressure and low temperature conditions. This equipment is specifically designed to determine the mechanical parameters and strength characteristics of methane hydrate bearing sediment (MHBS) samples. It is used to create water-saturated hydrate deposits with varying levels of saturation. The synthesis of MHBS samples with varying saturations is achieved by precisely regulating the amount of water. The saturation of MHBS is then determined and confirmed by the utilization of the “water content method” and the “gas collection method.” Triaxial shear tests are conducted on MHBS to examine the impact of hydrate saturation on the mechanical parameters and strength behaviours of MHBS. The experimental findings demonstrate that the presence of hydrate crystals enhances the robustness of the depositing medium. The stress-strain curves of MHBS have a hyperbolic shape, indicating strain hardening features. The stress-strain curves may be categorized into three distinct stages: the initial elastic deformation, followed by a slow shift to the initial yield deformation, and ultimately leading to strain hardening. As axial strain rises, the behaviour of the MHBS transitions progressively from elastic deformation to plastic deformation. The shear strength and initial yield strength of MHBS enhance with higher hydrate saturation. The reason for this is that as the hydrate saturation rises, the influence of hydrate crystals on the enhancement of sediment strength becomes more pronounced. However, the initial yield strain of each MHBS sample is between 0.5% and 1.5%, and the difference is not significant. When the hydrate saturation rises gradually, the cohesion of MHBS enhances. Nevertheless, the hydrate saturation has a very minor impact on the internal friction angle.