Development of soft x-ray absorption spectroscopy technique with simultaneous measurement in electron- and fluorescence-yield modes from high vacuum to ambient pressure for observation of surface adsorbed species

To understand the reactions of heterogeneous catalysts at the solid-gas interface under actual reaction conditions, it is important to develop a method to observe the surface-adsorbed species during the reaction, including the changes before and after the adsorption of light elements involved in the surface reaction. We developed a soft x-ray absorption spectroscopy (XAS) technique that allows simultaneous measurements in the electron- and fluorescence-yield modes in the pressure range of 10-4-1 × 105 Pa. In the developed system, the reaction gas near the sample surface is separated from the beamline vacuum by a Si3N4 window and confined to a small area to suppress x-ray absorption by the gas. The electron-yield spectra were obtained by measuring the sample current while applying a bias potential to the Si3N4 window. XAS measurements were performed from high vacuum to ambient pressure by setting the bias potential to 600 and 39 V below and above 100 Pa, respectively. An anatase TiO2 nanoparticle-deposited film was prepared by spin coating, and soft XAS was performed to observe the photocatalytic oxidative decomposition reactions of isopropanol in the presence of water and oxygen. The obtained O K-edge spectra showed that it is possible to observe adsorbed oxygen on solid oxides even under ambient pressure conditions containing 0.1% of oxygen gas.