Analysis of the effects of combined suction on hypersonic inlet starting performance

Abstract Taking a two-dimensional inlet (Case 1) as the original inlet, the combined suction schemes are designed and their influences on the self-starting ability of the inlet are studied. The flow fields at the design point and the self-starting progress of the inlets are calculated by the numerical simulation method. The results show that the three-slot combination scheme (Case 2) leads to the reduction of the mass flow rate of the throat at the design point by 1.15% and the increase of the total pressure recovery coefficient by 6.73%. The self-starting Mach number of the inlet decreases from 4.6 to 3.2, which indicates that the self-starting ability is improved significantly by the three-slot combination scheme. In order to illustrate the role of each slot in improving the self-starting ability, three two-slot combination schemes, which are called Case 3, Case 4, and Case 5, are set up by closing Slot 1, Slot 2, and Slot 3 in turn and their self-starting processes are simulated. The results indicate that the self-starting Mach numbers of Case 3, Case 4, and Case 5 are 3.6, 4.1, and 4.5 respectively, which are 0.4, 0.9, and 1.3 higher than that of Case 2 respectively. Slot 3 has the greatest influence on the self-starting ability. When the incoming Mach number rises to 4.2, a closed separation zone is induced between Slot 2 and the throat by the reflected shock wave on the cowl side of Case 5. Due to the lack of lip overflow, which is an important flow regulation mechanism, the separation zone has a strong self-sustaining ability, and the inlet keeps unstart until the incoming Mach number rises to 4.5. In addition, in the absence of Slot 1 or Slot 2, the large-scale separation zone will not disappear until the incoming flow pressure increases to a certain value.