Production Simulation of Stimulated Reservoir Volume in Gas Hydrate Formation with Three-Dimensional Embedded Discrete Fracture Model

Natural gas hydrates (NGHs) in the Shenhu area of the South China Sea are deposited in low-permeability clayey silt sediments. As a renewable energy source with such a low carbon emission, the exploitation and recovery rate of NGH make it difficult to meet industrial requirements using existing development strategies. Research into an economically rewarding method of gas hydrate development is important for sustainable energy development. Hydraulic fracturing is an effective stimulation technique to improve the fluid conductivity. In this paper, an efficient three-dimensional embedded discrete fracture model is developed to investigate the production simulation of hydraulically fractured gas hydrate reservoirs considering the stimulated reservoir volume (SRV). The proposed model is applied to a hydraulically fractured production evaluation of vertical wells, horizontal wells, and complex structural wells. To verify the feasibility of the method, three test cases are established for different well types as well as different fractures. The effects of fracture position, fracture conductivity, fracture half-length, and stimulated reservoir volume size on gas production are presented. The results show that the production enhancement in multi-stage fractured horizontal wells is obvious compared to that of vertical wells, while spiral multilateral wells are less sensitive to fractures due to the distribution of wellbore branches and perforation points. Appropriate stimulated reservoir volume size can obtain high gas production and production efficiency.