Parameter Optimization Method for Centrifugal Feed Disc Discharging Based on Numerical Simulation and Response Surface

In this study, a centrifugal feeding disc device is proposed. To investigate the influence of the process parameters on the discharging efficiency and the lifting of the discharging efficiency, the centrifugal feeding disc device was dynamically simulated based on the discrete element method (DEM), and the simulation results were experimentally verified. Based on the quadratic regression orthogonal test method, a significant lossless regression model of process parameters and discharging efficiency was established, and the response surface of the interaction of process parameters was obtained. The results indicated that the order of influence of the process parameters on the discharging speed of the centrifugal feeding disc was as follows: outer turntable speed > inner turntable speed > inner turntable tilt angle > conical turntable angle. The interaction of the conical turntable angle and the inner turntable tilt angle had the greatest influence on the centrifugal feed disc discharge efficiency. The response surface method (RSM) was used to optimize the process parameters, and the optimal combination of process parameters included an outer turntable speed of 135 r/min, an inner turntable speed of 64 r/min, an inner turntable tilt angle of 7°, and a conical angle of 15°. The discharged efficiency of the optimized centrifugal feeding disc device was increased by 31.9%.