Process optimization and finite element modeling in magnetorheological abrasive finishing of SS-316L with surface characterization

This study explores the potential of Magnetorheological Abrasive Finishing (MRAF) for ultra-precision finishing of SS-316L using a high-performance Nd-Fe-B (N-35 grade) magnetic tool. Key parameters, including the relationship between normal force (Fn) and working gap, magnetic flux distribution, and finishing spot area, were analyzed using ANSYS 2020 R1 ® Magnetostatic module simulations. Material removal rate (MRR) and surface roughness (Ra) were optimized through response surface methodology (RSM) using a central composite design (CCD) with two primary input factors: SiC abrasive volume fraction (5%, 10%, 15%) and abrasive mesh size (800, 1000, 1200). Statistical analysis via ANOVA revealed a significant influence of process variables, achieving a remarkable surface finish with a minimum Ra of 52 nm in just 60 min, utilizing an MR fluid with 10% SiC abrasives. Microscopic and spectroscopic evaluations confirmed enhanced surface morphology and microstructural refinement. Moreover, bioactivity studies in simulated body fluid highlighted improved hydroxyapatite layer formation on the finished SS-316L samples, underscoring the process’s potential for biomedical applications.