The Shear Performance of an Aircraft off Pin Made of Quartz Fiber Reinforced Phenolics: The Effect of the Fiber Distribution Property

Emergency breakaway pins (EBPs) have been widely used in aircraft, especially in the suspension connection between the engine device and the airfoil. Currently, the existing EBPs, which are made of metal materials, barely satisfy the lightweight requirement of the airplane industry. Thus, the construction of a novel EBP with quartz fiber reinforced phenolics is proposed in this study, and the shear response is examined experimentally using a double-sided shear test. The effect of the fiber distribution characteristic on the shear strength is then assessed quantitatively. The failure patterns, including the damage morphology of the two types of samples were then reconstructed using scanning electron microscopy (SEM). Experimental results showed that the breakaway composite pin fabricated by the laminated composite had a superior shear response than its counterpart with randomly distributed fibers for its uniaxially distributed fiber yarns provided a longer put-out damage trace that contributed to a higher shear-loading bearing capacity for the entire composite EBP. In specific, the average values of the shear strength and the shear stiffness for the former samples were higher by 61% and 22%, respectively, than that for the latter samples. Additionally, the composite EBP also has an excellent combination of lightweight advantage and stronger shear-bearing capacity over competing pins, providing novel insight for more secure designs for civil and military aviation.