Development of high-speed precision maize metering device for dense planting pattern with standard ridges

This study proposed a high-speed precision dual-chamber maize metering device for the dense planting pattern with standard ridge promoted in China. Through theoretical analysis of the sowing process, parameters for the key components have been designed. The metering device is capable of planting two rows in a single pass for high-speed precision seeding. The effect of operating speed and negative pressure on seed metering quality was investigated. A high-speed camera was used to capture the trajectory of maize seed at different operating speeds, and it was found that intra-row shifts were caused by collisions at the mouth of the seed guide tube and rotation of the seed as it fell. Employing a two-factor, five-level orthogonal rotation test, Investigated the optimal operating parameters for the maize metering device. Response surface analysis showed that optimum seed metering quality was achieved at 14.2 km/h and 13.5 kPa. Validation tests showed a qualified rate of 97.93%, with a coefficient variation of 8.97% for this method. Additionally, an energy consumption analysis indicated a reduction in operating energy consumption of approximately 32% compared to conventional air suction seed metering devices for dense planting with large ridges on the same area of farmland. This study provides insights for reducing energy consumption in the seeding process, contributing to the sustainable development of agricultural resources.