Influence of rope fastening on the spectrum of its natural transverse vibrations

According to the previously developed method, which takes into account the bending stiffness of steel ropes during their transverse oscillation, the ropes of the pedestrian bridge ‘Lovers’ in the city of Tyumen were investigated. The obtained values of tension forces and bending stiffness were within the expected range. The high variation of bending stiffness values forced to pay attention to the accuracy of the initial values of rope lengths, which were obtained from the photograph. To measure the rope lengths, a method of nodal harmonic registration was proposed, but the results obtained by this method were higher than the values obtained from the photograph. The evaluation of measurement errors did not explain this overestimation, which led to the necessity to revise the solution of the differential equation of transverse oscillations. It turned out that previously only its partial solution was considered, assuming a hinged rope attachment, whereas it is cantilevered and has a bending reaction. Taking this feature into account by introducing an additional boundary condition allowed to improve the calculation model and explain the overestimation of the rope length in the method of nodal harmonics.Taking into account the nature of the rope attachment allowed us to introduce a generalised parameter s, which takes zero value for rigid cantilever attachment, and is equal to one for articulated attachment. Then the stiffness weakening inside the anchorage will be manifested by the growth of the parameter s and can be detected by the results of the oscillation spectrum registration.