OPTIMASI FAKTOR EKSPOSI DENGAN VARIASI KETEBALAN FILTER TERHADAP NILAI DOSIS DAN KUALITAS CITRA RADIOGRAFI PADA PEMERIKSAAN PELVIS

This study examines the impact of varying X-ray tube voltage (kV) and filter thickness on patient radiation dose and image quality in radiographic procedures. It aims to optimize exposure factors to minimize patient dose while maintaining diagnostic image quality, contributing to safer and more efficient radiological practices. This quantitative experimental study investigates the impact of varying filter thickness and tube voltage on patient radiation dose. Using X-ray equipment, dosimeters, and phantoms, measurements of Incident Air Kerma (INAK) and Entrance Surface Air Kerma (ESAK) and effective dose are taken, followed by image quality assessments to optimize exposure factors while maintaining diagnostic efficacy. The study demonstrated that increasing filter thickness decreases both INAK and ESAK values, with the most significant dose reduction occurring at 2 mm thickness. Optimal image quality and effective dose reduction were observed with the 1 mm filter at 80 kV, reducing the dose by 14.3% to 20% while maintaining good spatial resolution and contrast. The study concludes that using a 1 mm aluminum filter with 80 kV significantly reduces the effective dose while maintaining image quality. It is recommended that hospitals adopt additional filters, conduct further research with different materials, and optimize exposure factors. Training for radiology technicians on these practices is essential to enhance patient safety and image quality. Keywords: X-ray Equipment, Entrance Surface Air Kerma, Effective Dose, Image Quality.