Technology of production of aluminosilicate refractories for units processing fluorinated waste

The aluminium production process through the electrolysis of cryolite-alumina melts involves a series of interconnected, sequential, and parallel technological operations, each defined by a specific level of engineering and technological advancement. The development of the modern aluminum industry is closely tied to the adoption of resource-efficient and environmentally friendly technologies, which focus on recycling secondary materials and industrial waste. Fluorinated carbon-based materials release fluorine into the gas phase at relatively low temperatures when heated, and in thermal units processing fluorinated waste, this fluorine, along with alkali metals, will remain in the gas phase. To enhance the durability of furnace linings against the corrosive atmosphere, refractories with the highest possible density (low porosity) and a high concentration of mullite in the matrix (the finely ground component of the batch) are required. These properties can only be achieved in refractory products produced by the semi-dry pressing method, which ensures high grain packing density and leads to the formation of a ceramic mullite bond after firing.