Closed-Loop Process of Extracting and Separating Zinc Impurities from Industrial Cobalt Products—Pilot Test Study

The cobalt-containing products of an enterprise were selected as the object of this study. The separation effect of Cyanex 272 on Zn and Co was studied through a pilot test. The results showed that Cyanex 272 had a high extraction rate for Zn at pH 3–3.4, up to 99.8%. The extracted Zn2+ was enriched in the organic phase, and the Zn2+ in the organic phase was extracted back into the aqueous phase in the stripping stage by adding strong acid. Addition amounts of strong acid of 50 g·L−1, 80 g·L−1, and 100 g·L−1 were set. The results showed that the addition amounts of 80 g·L−1 and 100 g·L−1 could significantly reduce the pH of the back-extraction solution and effectively enrich Zn2+ in the solution. There was a large amount of Zn2+ in the back-extraction solution, which could be used twice to prepare zinc carbonate products through neutralization and precipitation. By comparing the extraction effect, economic cost, and resource loss under different strong acid addition amounts, it was found that the 80 g·L−1 strong acid addition amount was more suitable for the actual production process. This study provides data support and practical evidence for the selection of industrial extraction process parameters for Zn2+ separation in actual cobalt products.