New impulse-based test method for early-age elastic modulus measurement in cementitious materials

Accurate monitoring of the elastic modulus evolution during the early-age fluid-solid transition in cementitious materials is crucial for understanding their mechanical behavior under early stresses. While existing methods, such as EMM-ARM, have proven effective, they are often associated with high costs or complex setups. This study presents the development of a low-cost, easy-to-implement system that employs impulse excitation applied to a composite beam, introducing the EMM-IRM method for the effective assessment of the elastic modulus of cement paste from the earliest stages of hydration. The use of impulse excitation is particularly advantageous in low-cost systems with accelerometers of lower sensitivity, as it enhances signal clarity and reduces interference from background noise, thereby improving measurement reliability. The system was validated through experimental comparisons with conventional EMM-ARM, cyclic compression, and traditional impulse excitation techniques, using Portland cement paste as the test material. The results show that EMM-IRM consistently estimates the elastic modulus, with a maximum deviation of 6.33% from other methods. Moreover, despite its cost-effectiveness, EMM-IRM demonstrates a higher signal-to-noise ratio compared to conventional EMM-ARM. This approach offers a practical solution for early-age characterization of cementitious materials, balancing cost, simplicity, and measurement accuracy. • Introduced an impulse-based EMM-IRM system for early-age cement paste evaluation. • Developed a cost-effective system using readily available components. • The proposed system is validated across conventional EMM-ARM, cyclic compression, and traditional impulse excitation tests.