Deformation prediction of overlying strata in multi-seam mining based on the influence function method-key stratum hybrid model

The extraction of coal seams from subterranean strata has the potential to induce displacement and deformation within the overlying strata. This leads to fractures in the strata and surface subsidence. The repetitive mining of coal seams, especially in scenarios involving multiple coal seams, can reactivate previously stabilized rock strata, causing them to subside and deform again. This exacerbates deformation and compromises the structural integrity of the strata. Consequently, there is an imperative need to thoroughly investigate the patterns of movement exhibited by overlying rock layers as a result of the recurrent extraction of coal seams. In recent years, significant progress in this field has been the effective utilization of the Influence Function Method-Key Stratum (IFM-KS) hybrid model. This model, distinguished by its amalgamation of mechanical and geometric methodologies, has proven to be efficacious in scrutinizing the movement dynamics of overlying strata in the context of single-layer mining operations. Based on that, this paper introduces a novel model for predicting rock layer movement and deformation in multi-seam mining. The calculation results derived from this model reveal the dynamics of rock layers' movement and deformation following secondary disturbances during repetitive mining. The accuracy and reliability of this newly proposed model in predicting rock movement during dual-layer coal mining are validated through both theoretical calculations and UDEC numerical simulations. The results demonstrate a high degree of consistency between the numerically simulated rock displacement and mathematical calculations and the rationality of the model. Based on the rock strata movement calculation results, the corresponding porosity distribution is also derived. Compared to single-layer coal mining, multi-seam mining could cause greater changes in porosity in the goaf area and extensive damage to rock strata. More fracture pathways between coal seams occur and a volume of air-leakage quantity is expected. This computational model provides invaluable insights for predicting rock strata deformation and porosity distribution in repetitive mining scenarios of a similar nature.