Corrugated veneer panel thermophysical properties

The article substantiates the need to develop new mechanisms for the hardwood use in modern conditions of Republic of Karelia timber industry. One of the potential uses of birch wood in wooden house construction is building materials production from veneer and slab materials based on it. A large amount of associated waste from processing birch wood into veneer stands out as one of the key problems. A new slab joinery and construction material made of corrugated birch veneer is considered. The purpose of this study is to evaluate the thermophysical properties of a corrugated board made of birch wood. To achieve this goal, the tasks and methods of research are defined. An experimental device has been developed to conduct an experiment to determine the values of thermophysical characteristics. DS18B20 temperature sensors were used to measure the surface temperature, as well as to monitor device operation and the room air temperature. The sensors are connected to the Arduino microcontroller platform, which was used to record and transmit sensor readings. Additionally, the course of the experiment was monitored using a thermal imager Testo 875-1i. During the experiment, more than 1000 measurements were carried out. As a result of data processing, a diagram of the dependence of the density of the heat flux passing through the sample on time, as well as diagrams of the dependence of thermal conductivity and thermal resistance on the temperature difference on the sample surfaces, was obtained. The diagrams show the regression dependences of changes in heat flux density, thermal conductivity and thermal resistance during measurements. The values of the heat flux density, thermal conductivity coefficient and thermal resistance calculated on the basis of regression equations and the values obtained experimentally are determined. The directions of further research of the material under consideration are determined.