Facile Doping and Functionalization of Molybdic Acid into Nanobiochar to Enhance Mercury Ion Removal from Water Systems

Functionalized nanomaterials with surface-active groups have garnered significant research interest due to their wide-ranging applications, particularly in water treatment for removing various contaminants. This study focuses on developing a novel, multi-functional nanobiosorbent by synthesizing nanosized biochar from artichoke leaves (NBAL) and molybdic acid (MA). The resulting nanobiosorbent, MA@NBAL, is produced through a microwave-irradiation process, offering a promising material for enhanced environmental remediation. The characteristics of assembled MA@NBAL were evaluated from SEM-EDX, XPS, TGA, FT-IR, and zeta potential detection. The size of particles ranged from 18.7 to 23.7 nm. At the same time, the EDX analysis denoted the existence of several major elements with related percentage values of carbon (52.9%), oxygen (27.6%), molybdenum (8.8%), and nitrogen (4.5%) in the assembled MA@NBAL nanobiosorbent. The effectiveness of MA@NBAL in removing Hg(II) ions was monitored via the batch study method. The optimized maximum removal capacity of Hg(II) ions onto MA@NBAL was established at pH 6.0, 30.0 min equilibrium time, and 20 mg of nanobiosorbent, providing 1444.25 mg/g with a 10.0 mmol/L concentration of Hg(II). Kinetic studies revealed that the adsorption process followed a pseudo-second-order model, with R² values ranging from 0.993 to 0.999 for the two tested Hg(II) concentrations, indicating excellent alignment with the experimental data. This suggests that the chemisorption mechanism involves cation exchange and complex formation. Isotherm model evaluation further confirmed the adsorption mechanism, with the Freundlich model providing the best fit, yielding an R² of 0.962. This result indicates that Hg(II) adsorption onto the surface of MA@NBAL nanobiosorbent occurs on a heterogeneous surface with multilayer formation characteristics. The results of the temperature factor and computation of the thermodynamic parameters referred to endothermic behavior via a nonspontaneous process. Finally, the valid applicability of MA@NBAL nanobiosorbent in the adsorptive recovery of 2.0 and 5.0 µg/mL Hg(II) from contaminated real aquatic matrices was explored in this study, providing 91.2-98.6% removal efficiency.