Study on the Cavitation Performance in the Impeller Region of a Mixed-Flow Pump Under Different Flow Rates

Mixed-flow pumps, optimized for marine engineering, provide a balance of high efficiency and adaptability, accommodating varied flow and head demands across challenging oceanic settings and are essential for reliable operations in tidal energy and subsea applications. The primary purpose of this paper is to perform a numerical analysis of the cavitation flow characteristics of the mixed-flow pump under differing operational circumstances. The cavitation simulation was implemented to explore the cavitation bubbles evolution and the pressure pulsation characteristics in the impeller region under diverse flow rates, utilizing the Shear Stress Transport (SST) turbulence model and the Zwart-Gerber-Belamri cavitation model as a foundation. The findings indicate that cavitation bubbles initially distribute at the leading edge of blade suction surfaces at the cavitation growth stage. The bubbles spread gradually with the decline of the available net positive suction head (NPSHa). At the same time, many bubbles appear in the area below the blade and extend to the rim of the suction side of blades. As the flow rate decreases, the critical net positive suction head (NPSHc) gradually declines. The dominant pressure pulsation frequency at the impeller inlet is the blade passing frequency, and the vibration at the impeller shroud inlet is more intense than that at the hub. The dominant frequency at the impeller outlet is mainly the blade passing frequency. With the development of cavitation, it changes to impeller rotation frequency at low flow rates, while the dominant frequency remains unchanged at high flow rates.