Continuously tunable negative pressure for engineering high-symmetry nanocrystalline phases

In this work, the phenomenon of strain induced by a mismatch in thermal expansion coefficients between a thin film and its substrate is harnessed in a new context, replacing the canonical planar support with a three-dimensional (3-D), nanoconfining scaffold in which we embed a material of interest. In this manner, we demonstrate a general approach to exert a continuously tunable, triaxial, tensile strain, defying the Poisson ratio of the embedded material and achieving the exotic condition of "negative pressure." This approach is hypothetically generalizable to materials of low modulus and high thermal expansion coefficient, and we use it here to achieve negative pressure in perovskite-phase CsPbI₃ embedded within the cylindrical pores of anodic aluminum oxide membranes. Through controlled thermal hysteresis, the perovskite crystal structure can be continuously tuned toward higher symmetry when confined in a scaffold with pore size <40 nm, in contrast with the symmetry-reducing action of any other mechanical perturbation. We use this effect to control the octahedral rotation angle that is critical to the remarkable photovoltaic attributes of halide perovskites. Under hundreds of megapascals of apparent negative pressure, the bandgap tunability is observed to follow the same quantitative trend observed for hydrostatic positive pressure, exploring the negative pressure region and demonstrating the relative dominance of bond stretching effects over average octahedral rotation angle on electronic structure. This study reveals and quantifies the structural and electronic consequences of 3D tensile strain present by design and provides a framework for understanding adventitious strain present in all nanocomposite materials.