Flash evaporation in a superheated liquid pool using water as medium

This paper proposes a fast cooling technology called flash evaporation or flashing to overcome cooling problems. Flashing is a pressure-driven phase change phenomenon widely studied because of its complex physics and numerous applications. An experimental system is fabricated to study the efficiency of the proposed process by considering water as a working fluid. A transparent acrylic column is used as the flash chamber, enabled with a high-speed camera to visualize and capture this fast and complex process. Experiments have been carried out with various initial temperatures from 65 °C to 80 °C, initial vacuum tank pressure ranging from 11.32 kPa to 41.32 kPa, and initial water heights of 80 mm and 140 mm. The flashing phenomenon is divided into two stages based on its xeffectiveness. From the present study, it becomes apparent that the drop in the temperature increases with the initial temperature and decreases with increasing vacuum tank pressure. The cooling rate is improved by 49.1% by increasing the initial pool temperature by 23%. The present study demonstrates an effective application of the flashing process in areas requiring high cooling rates and rapid vapour generation, such as refrigeration and drying. • Temperature drop takes place in an exponential manner. • High-speed camera is used for visualizing the two-phase evolution. • Initial pool temperature and vacuum pressure boost cooling performance. • Flashing characteristics of water under different experimental conditions are defined.