Development of an Automatic Harvester for Wine Grapes by Using Three-Axis Linear Motion Mechanism Robot

In Japan, the aging and decreasing number of agricultural workers is a significant problem. For wine grape harvesting, especially for large farming areas, there is physical strain to farmers. In order to solve this problem, this study focuses on developing an automated harvesting robot for wine grapes. The harvesting robot needs high dust, water, and mud resistance because grapevines are grown in hard conditions. Therefore, a three-axis linear robot was developed using a rack and pinion mechanism in this study, which can be used in outdoor conditions with low cost. Three brushless DC motors were utilized to drive the three-axis linear robot. The motors were controlled using a control area network (CAN) bus to simplify the hardware system. The accuracy of the robot positioning was evaluated at the automated harvesting condition. The experiment results show that the accuracy is approximately 5 mm, 9 mm, and 9 mm in the x-axis (horizontal), y-axis (vertical), and z-axis (depth), respectively. In order to improve the accuracy, we constructed an error model of the robot and conducted a calibration of the robot. The accuracy was improved to around 2 mm of all three axes after calibration. The experimental results show that the accuracy of the robot is high enough for automated harvesting of the wine grapes.