Enhancing particle segregation in stem wood combustion flue gas wet scrubbers: Experimental investigation of operational conditions

This study investigates the impact of various parameters on particulate-matter (PM) collection from biomass combustion flue gas using a packed-bed wet scrubber. It is important to note that most of the particulate release during biomass combustion is dominated by particle sizes <10 μm(PM 10 ). The experiments studied parameters affecting submicron PM collection efficiency, such as the gas velocity, bed material, and flue gas humidity. The experimental results and analyses focused on the PM 10 collection efficiency and provided valuable insights. A higher flue gas velocity reduces the time for the contact between the flue gas and the absorption solution, leading to decreased efficiency. In addition, the findings indicate that a higher flue gas humidity improves the collection efficiency by having a positive effect on the diffusiophoresis force. Testing the packed-bed material confirmed that a wet scrubber half-filled with steel-pall-rings showed a better performance than the same scrubber half-filled with ceramic-Berl-saddles. Furthermore, water was less effective in the absorber than salt solutions since the diffusiophoresis force produced by water acted in the opposite direction to that of the force produced by the salt solutions. The PM released after the wet scrubber absorber is below the EU's established limits for boiler power < 500kW.