Investigation on flow instability in the hump region of the large vertical centrifugal pump under cavitation conditions based on proper orthogonal decomposition

Complex flow patterns in a large vertical centrifugal pump (LVCP) when operating in the hump region under cavitation conditions should deserve more attention. This research investigates the interaction between cavitation and vortices in LVCP from the perspective of rigid vortex transport characteristics and modal decomposition. The hump characteristics of LVCP are more pronounced under cavitation. The backflow vortex cavitation at the impeller inlet and the leading edge cavitation of the diffuser vanes can be found under part-load conditions. Rigid vortex analysis reveals the low pressure backflow vortices are generated between the impeller inlet and the inlet pipe. The fusion of leading edge separation vortices with pressure surface separation vortices and shedding high pressure trailing edge separation vortices in the diffuser generates the unique stall vortices with a high pressure gradient. Under part-load conditions, the combination of rigid vortex stretching, rigid vortex dilation (RVD), coriolis force, and baroclinic torque (BT) cause further increase in the strength of cavitation tail vortices. The RVD and BT caused by diffuser vanes leading edge cavitation can accelerate the development and fusion of leading edge separation vortices, pressure surface separation vortices, and trailing edge separation vortices in the diffuser, then generate unique stall vortices with high pressure gradient in advance. Proper orthogonal decomposition analysis indicates that the unique stall vortices in the diffuser occupy the main energy of the flow pattern. The flow pattern in the diffuser is superimposed by a variety of vortices with different frequency characteristics, and these vortices show a particular low frequency signal well below fn. The cavitation at the diffuser vanes leading edge interacts with vortices to induce leading edge separation vortices and unique stall vortices with low frequency characteristics more easily, and these vortices always dominate the flow pattern evolution.

Authors

Institutions

Publication Details

Journal
Physics of Fluids
Published
2024-11-01
DOI
https://doi.org/10.1063/5.0236649
Citations
8
Primary Topic
Cavitation Phenomena in Pumps
Type
article
Field-Weighted Citation Impact
2.15

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Investigation on flow instability in the hump region of the large vertical centrifugal pump under cavitation conditions based on proper orthogonal decomposition

Gang Yang, Qinghui Lu, Xi Shen, Qiang Pan et al.
8 citations
Physics of Fluids
Cavitation Phenomena in Pumps
2.15
article

Investigation on flow instability in the hump region of the large vertical centrifugal pump under cavitation conditions based on proper orthogonal decomposition

Gang Yang, Qinghui Lu, Xi Shen, Qiang Pan, Desheng Zhang, Qingjiang Pang
article en
8 citations

Abstract

Complex flow patterns in a large vertical centrifugal pump (LVCP) when operating in the hump region under cavitation conditions should deserve more attention. This research investigates the interaction between cavitation and vortices in LVCP from the perspective of rigid vortex transport characteristics and modal decomposition. The hump characteristics of LVCP are more pronounced under cavitation. The backflow vortex cavitation at the impeller inlet and the leading edge cavitation of the diffuser vanes can be found under part-load conditions. Rigid vortex analysis reveals the low pressure backflow vortices are generated between the impeller inlet and the inlet pipe. The fusion of leading edge separation vortices with pressure surface separation vortices and shedding high pressure trailing edge separation vortices in the diffuser generates the unique stall vortices with a high pressure gradient. Under part-load conditions, the combination of rigid vortex stretching, rigid vortex dilation (RVD), coriolis force, and baroclinic torque (BT) cause further increase in the strength of cavitation tail vortices. The RVD and BT caused by diffuser vanes leading edge cavitation can accelerate the development and fusion of leading edge separation vortices, pressure surface separation vortices, and trailing edge separation vortices in the diffuser, then generate unique stall vortices with high pressure gradient in advance. Proper orthogonal decomposition analysis indicates that the unique stall vortices in the diffuser occupy the main energy of the flow pattern. The flow pattern in the diffuser is superimposed by a variety of vortices with different frequency characteristics, and these vortices show a particular low frequency signal well below fn. The cavitation at the diffuser vanes leading edge interacts with vortices to induce leading edge separation vortices and unique stall vortices with low frequency characteristics more easily, and these vortices always dominate the flow pattern evolution.

Physics of FluidsVol. 36(11)
Jiangsu University (CN)
National Natural Science Foundation of China, China Scholarship Council, Graduate Research and Innovation Projects of Jiangsu Province, National Science Fund for Distinguished Young Scholars
Openalex Percentile: Top 13%
Cavitation Phenomena in Pumps
2.15
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.