Study on Characterization of SrO Aerosols Generated by Optimized Thermal Plasma Torch Aerosol Generator

Abstract Plasma Torch Aerosol Generation System (PTAGS) has been employed to generate nano aerosols with desirable characteristics. The operational parameters of PTAGS installed in the aerosol test facility have been optimized, and aerosols are generated using non-radioactive SrO 2 powder. The current-voltage characteristics, electro-thermal efficiency and torch power are studied as a function of the flow rate of the plasma-generating gas (mixture of argon and nitrogen) and the arc current of the plasma torch. The relation of arc characteristics is determined using the Nottingham formulation. Based on this, torch parameters evolved and optimized as 20 kW power, 70% electro-thermal efficiency, 25 L min − 1 flow rate of plasma forming gas, 5 mg min − 1 powder feed rate and for 4–5 min torch operation towards the generation of SrO nano aerosols to achieve 10 12 m − 3 and ~ 25 mg m − 3 for the count and mass concentration of aerosol respectively. The initial size distribution of the aerosols is in the few tens of nanometre range (10–40 nm) with a mean diameter of 26 nm (σ g = 1.45). Scanning Electron Microscope and Energy dispersive X-ray analysis revealed that the morphology of nano aerosols was nearly spherical and the formation of SrO nanoparticles. A set of PTAGS operational parameters has been standardized to perform further experiments related to reactor safety analysis. PTAGS shall be tuned for aerosol generation in a large facility to achieve the characteristics equivalent to reactor accidental conditions.