Optimization of cooling system parameters with temperature field of mass concrete during hydration

Embedded cooling pipe system is regarded as the primary means in mass concrete to control the temperature. The effects of three factors are investigated on the thermal field of mass concrete by the combination of measurement, theoretical analyse and numerical simulation in this paper, including cooling pipe spacing, pipe diameter and pipe arrangement. The results demonstrate that the peak temperature is reduced by the increase in both of the pipe distance and pipe diameter. The peak temperature is measured to decrease from 1°C to 3°C on the monitoring points, with additional 0.5 m of pipe spacing or 10 mm of pipe diameter. The serious influence is conducted by the pipe diameter on the temperature difference, and the selection of cooling pipe diameter is considered to balance multiple problems in the project necessarily. The serpentine arrangement is more widely used for better cooling and construction in the comparison of the circular arrangement. The results on the optimization of cooling system are utilized for the project to control the hydration heat accurately and reduce or even prevent the generation of cracks.