Effect of chromium doping on the grain boundary character of WC-Co

The life of cutting tool inserts is critically important for efficient machining, reducing manufacturing cost, embedded energy, and enabling more complex parts to be machined. For these applications, cemented carbide (WC-Co) materials are a prime candidate. The performance of these materials can be limited by early fracture, typically via an intergranular fracture path with respect to carbide grains. This motivates further studies to understand the character of the grain boundary network so that grain boundary engineering (GBE) of WC-Co tools can be used to improve tool life and performance. In this work, we have used Rohrer et al.'s five-parameter grain boundary character distribution (GBCD) analysis to examine the grain boundary network of WC-10wt%Co and WC-10wt%Co-1wt%Cr samples (Rohrer et al., 2004a [ 1 ]). It was found that the measured area fraction of the Σ2 boundaries was comparable to the values reported in the literature despite the relatively larger grain sizes (~14 μm) and higher cobalt contents. The result suggests that chromium doping increases the area fraction of Σ2 boundaries from 12.8 % to 14.8 %. It is proposed that this is a consequence of altering the Σ2 boundary energy, as associated with adding chromium. • GBCD analysis was conducted on WC-10wt%Co and WC-10wt%Co-1wt%Cr samples. • 1 wt% chromium doping increases the fraction of Σ2 boundaries of WC-10wt%Co. • The increase in area fraction for Σ2 boundaries is approximately 15 %. • This suggests a decrease in grain boundary energy. • This aligns with previous grain boundary mechanical tests.