Prediction of Syngas Composition During Gasification of Lignocellulosic Waste Mixtures

Avoiding global dependence on fossil oils and improving the environmental impact of energy production are factors that drive research into renewable energies. Considering lignocellulosic biomass residues as a raw material for gasification, a thermochemical process that converts lignocellulosic resources into synthesis gas (H2, CO, CH4, and CO2) is an alternative under study due to its low costs, high efficiency, and wide variety of applications. Fortunately, there are still areas for its improvement and technological development. For example, this can be achieved by gasification. Distinct types of lignocellulosic biomass, such as sugarcane bagasse, wheat straw, pine sawdust, or corn cob, differ in their physical, chemical, and morphological properties, which can affect the characteristics of the gasification process. This work uses the generalized stoichiometry and mass and atomic balances in the gasification reactor to predict the composition of syngas produced via the gasification of both individual substrates and mixtures. The results provide useful information for the design and operation of gasification reactors with an operating region between 2.0 bar and 4.5 bar and between 1023.15 K and 1223.15 K, particularly with regard to understanding the effects of distinct types of biomasses in terms of their humidity and molecular weight on the operation and performance of the process. One important conclusion reached after simulating the addition of more vapor is that the (H2/CO) ratio cannot be increased indefinitely: it is limited by the thermodynamic equilibrium reached by the system.