Effect of synthesis temperature on the properties and photocatalytic performance of peroxo-titanate nanotubes prepared by bottom-up synthesis method

Abstract The alkaline treatment synthesis of titania/titanate nanotubes (TNTs) requires highly concentrated alkaline solutions (≥ 10 mol/L), which pose environmental and productivity limitations. In contrast, a bottom-up synthesis method for peroxo-titanate nanotubes (PTNTs) has been developed. This method offers two advantages: it can synthesize materials using low-concentration alkaline solutions (1.5 mol/L) and produce photocatalytic materials that are responsive to visible light. In general, the higher the crystallinity of a catalyst, the better its properties. However, PTNTs synthesized at temperatures close to their boiling point (around 100 °C) exhibit low crystallinity. This study hypothesizes a hydrothermal synthesis method at higher temperatures will enhance the crystallinity and photocatalytic performance of PTNTs, synthesizing them at temperatures ranging from 120 to 200 °C using a method capable of exceeding the boiling point. Higher synthesis temperatures resulted in improved morphological and crystallographic properties of the PTNTs. However, the formation of peroxo-bonding, crucial for visible light responsiveness, decreased. Nevertheless, peroxo-bonding formation was still achievable at the highest temperature of 200 °C, and the sample exhibited the best Rhodamine B (Rh B) photodegradation performance under visible light due to its enhanced specific surface area and crystallinity. This study highlights the novelty and environmental significance of hydrothermally synthesized PTNTs as superior photocatalysts by optimizing the synthesis temperature while using lower concentration alkaline solutions.