<scp>PVDF</scp>‐based nanocomposite coatings with superhydrophobic and antibacterial properties on stainless steel surfaces

Abstract In this study, using a spray‐coating technique, stainless steel surfaces were coated with polyvinylidene fluoride (PVDF) and carbon soot nanoparticles. We imparted various surface properties onto the coatings' surfaces by varying the nanoparticle content and the preparation method. The main aim was to develop antibacterial surfaces by inducing superhydrophobic properties in stainless steel surfaces. In a one‐step preparation method, 5% and 10% of nanoparticles were insufficient to achieve superhydrophobicity, whereas 20% significantly increased the water contact angle to 153°. Morphological evaluations revealed the formation of a nano‐scale structure, which also led to a staggering antibacterial rate of 99.5% against Listeria monocytogenes . Using a two‐step preparation, soot nanoparticles were localized at the coating's top layer, which led to superhydrophobicity at a lower nanoparticle content (10%). However, the bacterial adhesion study showed a lower antibacterial rate (~93%). The difference in bacterial adhesion results was explained by various roughness structures according to the atomic force microscopy results. The developed system has a promising potential to be used as self‐cleaning and antibacterial coatings in the medical and food industries. Highlights Stainless steel surfaces were coated with PVDF and carbon soot nanoparticles Imparted various surface properties onto the coatings' surfaces Developed antibacterial surfaces by inducing superhydrophobic properties Using a two‐step, soot nanoparticles were localized at the coating's top layer Bacterial adhesion study showed a lower antibacterial rate (~93%).