Reforming Natural Gas for CO2 Pre-Combustion Capture in Trinary Cycle Power Plant

Today, most of the world’s electric energy is generated by burning hydrocarbon fuels, which causes significant emissions of harmful substances into the atmosphere by thermal power plants. In world practice, flue gas cleaning systems for removing nitrogen oxides, sulfur, and ash are successfully used at power facilities but reducing carbon dioxide emissions at thermal power plants is still difficult for technical and economic reasons. Thus, the introduction of carbon dioxide capture systems at modern power plants is accompanied by a decrease in net efficiency by 8–12%, which determines the high relevance of developing methods for increasing the energy efficiency of modern environmentally friendly power units. This paper presents the results of the development and study of the process flow charts of binary and trinary combined-cycle gas turbines with minimal emissions of harmful substances into the atmosphere. This research revealed that the net efficiency rate of a binary CCGT with integrated post-combustion technology capture is 39.10%; for a binary CCGT with integrated pre-combustion technology capture it is 40.26%; a trinary CCGT with integrated post-combustion technology capture is 40.35%; and for a trinary combined-cycle gas turbine with integrated pre-combustion technology capture it is 41.62%. The highest efficiency of a trinary CCGT with integrated pre-combustion technology capture is due to a reduction in the energy costs for carbon dioxide capture by 5.67 MW—compared to combined-cycle plants with integrated post-combustion technology capture—as well as an increase in the efficiency of the steam–water circuit of the combined-cycle plant by 3.09% relative to binary cycles.