Tunable Lotus Leaf Effect by Three-Dimensionally Printed Stretchable Objects

Adjustable wettability is important for various fields, such as droplet manipulation and controlled surface adhesion. Herein, we present high-resolution 3D stretchable structures with tunable superhydrophobicity, fabricated by a stereolithography-based printing process. The printing compositions comprise nonfluorinated monomers based on silicone urethane with dispersed hydrophobic silica particles. 3D lotus-like structures were designed and printed, having microsize pillars located at the external surfaces, with controlled dimensions and interspacing. The design of the pillars and the presence of the hydrophobic silica particles resulted in superhydrophobicity due to the surface structuring and entrapment of air between the pillars. The best structures display a contact angle of 153.3° ± 1.3° and rolling angle of 3.3° ± 0.5°, and their self-cleaning, water repellency, and buoyancy are demonstrated. The durability of the structure over time, water immersion, and heat exposure were tested, confirming the preservation of superhydrophobicity under these conditions. Upon stretching the surfaces, the interpillar distances change, thus enabling tuning the wetting properties and achieving good control over the contact and rolling angles, while the stretching-induced superhydrophobicity is reversible. This approach can expand the potential applications of superhydrophobic soft materials to fields requiring control over the wetting properties, including soft robotics, biomedical devices, and stretchable electronics.