Accounting for melting properties in the multi-solid paraffin prediction model for analyzing well production at fields in the Republic of Kazakhstan

The deposition of paraffin on pipeline walls is a serious flow issue. leading to a reduction in oil production due to the decreased flow cross-sectional area. and in severe cases. to complete blockage. This problem also results in increased energy consumption and causes failure of surface equipment due to paraffin plugs. Traditional methods predict paraffin crystallization temperature by considering the impact of temperature on the solubility parameters of individual components in both liquid and solid phases as well as their molar volumes. The goal of this study is to improve the prediction of paraffin deposition in Kazakhstan crude oil by incorporating an evaluation of melting properties into the multi-solid (MS) body prediction model. The process of calculating and adjusting melting properties to enhance the accuracy of the MS model is described in detail. This approach helps to overcome the limitations faced by most existing models when adapting to different types of crude oil. In this study, the focus is on optimizing the multi-solid (MS) body prediction model for paraffin deposition by integrating the melting properties of crude oil components. The improvement of the MS model is crucial because paraffin deposition is a significant issue in Kazakhstan's oil fields, where the wide range of reservoir conditions can cause standard prediction models to fall short. By enhancing the accuracy of melting point calculations, the updated model can better predict the onset of paraffin crystallization and its deposition tendencies under varying pressure and temperature conditions. Keywords: melting properties; multi solid solution; petroleum; solid solution; paraffin deposition