A Novel Mesoporous SBA‐15 Supported Bifunctional Heterogeneous Catalyst for Base‐Free Transfer Hydrogenation Reaction of Ketones

ABSTRACT Among the problems encountered in the catalytic transfer hydrogenation reactions of ketones, the base sensitivity of ketones and the corrosive effects of the bases used in the reaction have an important place especially in industrial terms. Although there are various approaches to overcome this problem, solutions based on the intrinsic properties of the catalyst used seem more suitable. Within the scope of this study, a novel heterogeneous catalyst was prepared for the transfer hydrogenation reaction of ketones, which can operate in base‐free environment. To prepare the heterogeneous catalyst, 1,2‐diphenylethane‐1,2‐diamine was first tosylated and then the silyl derivative was synthesized and grafted onto mesoporous silica SBA‐15. Characterizations of the obtained heterogeneous catalyst and SBA‐15 were carried out by X‐ray diffractometer (XRD), N 2 sorption, thermogravimetric analysis (TGA), scanning electron microscope (SEM), energy dispersive X‐ray analysis, and Fourier transform infrared (FT‐IR) analysis. The results obtained showed that the functionalized 1,2‐diphenylethane‐1,2‐diamine compound was successfully immobilized into the SBA‐15 structure. Determination of the catalytic activity of the heterogeneous catalyst was carried out in transfer hydrogenation reactions of various aromatic ketones. After determining the optimum reaction conditions with acetophenone, a conversion rate of (70%) was observed in the acetophenone to 1‐phenylethanol reaction that took place without a base. Under same conditions a higher conversion rate of (73%) was observed in the 4′‐chloroacetophenone to 1‐(4‐chlorophenyl)ethanol reaction. In the reactions performed to determine recyclability, after a 70% conversion rate, 61% and 65% conversion rates, respectively, were observed in the reaction from acetophenone to 1‐phenylethanol under the same conditions.