The influence of modification of the geometry of the front surface of the RFSSW tool inner sleeve on the fatigue life of joints during joining clad sheets made of aluminum alloy 2024-T3

Abstract Refill Friction Stir Spot Welding (RFSSW) has a number of advantages that make it a possible alternative to riveting and resistance welding in aerospace structures, the automotive industry and other applications. Adequate determination of technological parameters which ensure the desired properties of welds and their functioning in various operating conditions requires, among others, appropriate fatigue life of connections. The article presents the results of comparative tests of the mechanical properties of welds (load-bearing capacity and fatigue life at selected three load levels) made with a basic tool (G0) and a tool with a modified geometry (G4). The samples were made of 1.27 mm thick clad sheets of 2024-T3 aluminum alloy with an additional oxide anodic coating. It has been shown that the modified geometry of the working surface of the inner sleeve of the RFSSW tool improves the conditions and course of the plasticization and stirring process of the joined materials. The use of a G4 geometry tool allowed for approximately 30% higher joint load-bearing capacity and approximately twice as long fatigue life (at lower load levels) compared to welds made with the G0 tool.