Exergetic analysis and multiparametric optimization of a novel three‐fluid‐based organic Rankine cycle evaporative system via Taguchi method

Abstract Evaluations were conducted on the thermal performance of an organic Rankine cycle (ORC) system using three fluids as the evaporative system at a low‐grade heat source. The modified ORC evaporators were replaced with a three‐fluid system, which included hot fluids at the top and bottom and an isopentane working fluid in the middle section. Furthermore, the thermal performance assessment with a hot fluid heat transfer ratio in the outer and inner tubes ( Q 2 / Q 1 ) varying from 25:75 to 75:25 has been investigated. The impact of the hot fluid's ( Q 2 / Q 1 ) heat transfer ratios to saturated steam on the modified ORC's thermal performance assessment was examined, with an evaporative temperature range of 45–65°C and a pinch point temperature difference (PPTD) of 3–10°C. The Taguchi technique solves multiparameter optimization using the L9 orthogonal array. The findings showed that in three‐fluid‐based modified ORC systems, the network output, exergetic efficiency, and irreversibility went down with PPTD for all three Q 2 / Q 1 cases. For Q 2 / Q 1 of 75:25, the ORC's energetic efficiency and overall irreversibility reached their optimum, while a PPTD of 3–10°C reduced the exergetic efficiency by 19.71%. Also, Q 2 / Q 1 of 75:25 showed the highest and 200% higher ORC system work done at PPTD of 3°C than Q 2 / Q 1 of 25:75—the lowest. Modified ORC network generation, energy output, and heat transfer rate showed excellent results at an evaporative temperature of 58.33°C. For optimal network productivity, Q 2 / Q 1 of 75:25 was 160% and 40% greater than 50:50 and 25:75 at 58.33°C, respectively. The three‐fluid‐based modified ORC system performs better with a 75:25 Q 2 / Q 1 ratio. According to Taguchi's analysis, evaporation temperature affects the improved ORC system's thermal, exergy, and network generation. Also, heat transfer ratios ( F = Q 2 / Q 1 ) largely affect system irreversibility.

Authors

Institutions

Publication Details

Journal
Heat Transfer
Published
2024-11-05
DOI
https://doi.org/10.1002/htj.23204
Primary Topic
Thermodynamic and Exergetic Analyses of Power and Cooling Systems
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Exergetic analysis and multiparametric optimization of a novel three‐fluid‐based organic Rankine cycle evaporative system via Taguchi method

Rashmi Rekha Sahoo
Heat Transfer
Thermodynamic and Exergetic Analyses of Power and Cooling Systems
article

Exergetic analysis and multiparametric optimization of a novel three‐fluid‐based organic Rankine cycle evaporative system via Taguchi method

Rashmi Rekha Sahoo
article en

Abstract

Abstract Evaluations were conducted on the thermal performance of an organic Rankine cycle (ORC) system using three fluids as the evaporative system at a low‐grade heat source. The modified ORC evaporators were replaced with a three‐fluid system, which included hot fluids at the top and bottom and an isopentane working fluid in the middle section. Furthermore, the thermal performance assessment with a hot fluid heat transfer ratio in the outer and inner tubes ( Q 2 / Q 1 ) varying from 25:75 to 75:25 has been investigated. The impact of the hot fluid's ( Q 2 / Q 1 ) heat transfer ratios to saturated steam on the modified ORC's thermal performance assessment was examined, with an evaporative temperature range of 45–65°C and a pinch point temperature difference (PPTD) of 3–10°C. The Taguchi technique solves multiparameter optimization using the L9 orthogonal array. The findings showed that in three‐fluid‐based modified ORC systems, the network output, exergetic efficiency, and irreversibility went down with PPTD for all three Q 2 / Q 1 cases. For Q 2 / Q 1 of 75:25, the ORC's energetic efficiency and overall irreversibility reached their optimum, while a PPTD of 3–10°C reduced the exergetic efficiency by 19.71%. Also, Q 2 / Q 1 of 75:25 showed the highest and 200% higher ORC system work done at PPTD of 3°C than Q 2 / Q 1 of 25:75—the lowest. Modified ORC network generation, energy output, and heat transfer rate showed excellent results at an evaporative temperature of 58.33°C. For optimal network productivity, Q 2 / Q 1 of 75:25 was 160% and 40% greater than 50:50 and 25:75 at 58.33°C, respectively. The three‐fluid‐based modified ORC system performs better with a 75:25 Q 2 / Q 1 ratio. According to Taguchi's analysis, evaporation temperature affects the improved ORC system's thermal, exergy, and network generation. Also, heat transfer ratios ( F = Q 2 / Q 1 ) largely affect system irreversibility.

Heat TransferVol. 54(1)
Indian Institute of Technology BHU (IN), Banaras Hindu University (IN)
Affordable and clean energy
Openalex Percentile: Top 80%
Thermodynamic and Exergetic Analyses of Power and Cooling Systems
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.