COMPARISON OF THE EFFECTS OF STANDARD NOZZLES AND EXTENSION TUBES ON THE EROSION OF PMMA USING PULSATING WATER JET TECHNOLOGY

The study of bone cement disintegration is important for advancing orthopedic and trauma surgery outcomes. Bone cement, commonly used in joint replacement procedures, plays a vital role in fixation implants. However, the long-term stability and integrity of bone cement are critical for the success of these procedures. This study focuses on the use of ultrasonic pulsating water jet technology for the selective removal of bone cement, aiming to provide a precise and efficient method for revision surgeries. The disintegration efficiency is measured in terms of depth, width and volume of the disintegrated bone cement as a result of variations in the nozzle geometry, supply pressure and traverse speed. Two different nozzle types, the standard nozzle insert and nozzle with an extension tube of 100 mm having a diameter of 0.3 mm, are used. Two supply pressure levels were taken as 10 and 20 MPa with five levels of traverse speeds as 0.5, 1, 1.5, 2 and 2.5 mm/s. The results showed an increased disintegration efficiency for all experimental conditions using an extension tube nozzle as compared to a standard nozzle (20 – 25% in terms of disintegration volume). Also, the disintegration efficiency increased with higher pressure level values (8.2 mm3 and 4.85 mm3 for p = 20 and 10 MPa, respectively) and lower traverse speed values. The results showed a promising direction in terms of the utilization of an ultrasonic pulsating jet with a modified nozzle type for higher bone cement disintegration efficiency.