Exploring the Potential of Recycled Polyethylene Terephthalate—Lignocellulose/Carbon Nanotube–Graphene Nanosheets an Efficient Extractor for Oil Spill

The global challenge of oil spill treatment has been addressed using nanocomposite-based natural fibers. These materials offer great potential in oil spill cleanup and are considered due to their environmental friendliness, high efficiency, and low cost. Thus, the current study reports a novel composite fabricated from date palm fiber (DPF) and recycled polyethylene terephthalate (rPET) with a proper combination of a mixture of carbon nanotubes (CNTs) and graphene nanosheets (GNSs) for oil removal. The established nanocomposite (DPF-rPET/CNT/GNS) was fabricated via physical mixing of various quantities (0.9, 0.8, and 0.7 g) of PET, along with varying loads of DPF at different proportions of CNT:GNS. The prepared nanocomposite (DPF-rPET/CNT/GNS) was fully characterized using scanning electron microscopy–energy dispersive X-ray (SEM-EDX) analysis, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), and Brunauer–Emmett–Teller (BET) analysis. In static experiments and under the optimal parameters of pH, sorbent doze, shaking time, and quantity of diesel oil), the established sorbent (DPF-rPET/CNT-GNS nanocomposite) displayed excellent adsorption capacity (98 mg/g). This study also expands the utility of the sorbent for the reusability of the oil adsorption, maintaining performance after five cycles. The adsorption data fitted well with the Langmuir isotherm model with a correlation coefficient (R2) of 0.99 and maximum adsorption capacity of 99.7 mg/g, indicating monolayer adsorption. Additionally, the adsorption kinetics followed a pseudo-second-order model, with an R2 near unity and an adsorption capacity of 99.09 mg/g. This study highlights the promising potential of the DPF-rPET/CNT-GNS composite as an effective adsorbent for treating oily water.