Geometric flow control in lateral flow assays: Macroscopic two-phase modeling

Lateral flow assays (LFAs) are widely employed in a diverse range of applications, including clinical diagnostics, pharmaceutical research, forensics, biotechnology, agriculture, food safety, and environmental analysis. A pivotal component of LFAs is the porous polymeric membrane, which facilitates the capillary-driven movement of fluids, known as “imbibition,” in which a wetting fluid displaces a non-wetting fluid within the pore space of the membrane. This study presents a multi-scale modeling framework designed to investigate the imbibition process within LFAs. The framework integrates microscopic membrane characteristics into a macroscopic two-phase flow model, allowing the simulation of imbibition in membranes with different micro-scale properties and macro-scale profiles. The validity of the model was established through comparative analysis with documented case studies, a macro-scale single-phase flow model, and experimental observations, demonstrating its accuracy in simulating the imbibition process. The study also examines imbibition in various geometric configurations, including bifurcated (Y-shaped) and multi-branch geometries commonly found in multiplexed LFAs. The influence of geometric features such as length ratio, width ratio, branching angle, bifurcation point location, and asymmetry on fluid transport is investigated. Results indicate that membranes with larger branching angles exhibit slower imbibition. In addition, the influence of membrane type on macroscopic flow patterns is evaluated, showing that membranes with lower permeability require longer imbibition times. The insights gained from this research support a data-driven strategy for manipulating wetting behavior within LFAs. This approach can be leveraged to optimize the performance of LFAs and increase their effectiveness in various applications.