Process Simulation and Technical Evaluation Using Water-Energy-Product (WEP) Analysis of an Extractive-Based Biorefinery of Creole-Antillean Avocado Produced in the Montes De María

The annual increase in the world’s population significantly contributes to recent climate change and variability. Therefore, researchers, engineers, and professionals in all fields must integrate sustainability criteria into their decision-making. These criteria aim to minimize the environmental, social, economic, and energy impacts of human activities and industrial processes, helping mitigate climate change. This research focuses on developing scalable technology for the comprehensive use of avocados, adhering to sustainability principles. This work presents the modeling, simulation, and the WEP (Water-Energy-Product) technical evaluation of the process for obtaining bio-oil, chlorophyll, and biopesticide from the Creole-Antillean avocado. For this, the extractive-based biorefinery data related to water, energy, and products are taken from the material balance based on experimental results and process simulation. Then, eight process parameters are calculated, and eleven technical indicators are determined. Later, the extreme technical limitations for every indicator are demarcated, and an evaluation of the performance of the indicators is carried out. Results showed that the process has a high execution in aspects such as fractional water cost (TCF) and energy cost (TCE), as well as solvent reuse during extraction processes (SRI) and production yield, noting that the mentioned indicators are above 80%. In contrast, the metrics related to water management (FWC) and specific energy (ESI) showed the lowest performance. These discoveries support the use of optimization techniques like mass process integration. The energy-related indicators reveal that the process presents both benefits and drawbacks. One of the drawbacks is the energy source due to the high demand for electrical energy in the process, compared to natural gas. The specific energy intensity indicator (ESI) showed an intermediate performance (74%), indicating that the process consumes high energy. This indicator enables us to highlight that we can find energy aspects that require further study; for this reason, it is suitable to say that there is potential to enhance the energy efficiency of the process by applying energy integration methods.