Harnessing Deep Learning for Enhanced MPPT in Solar PV Systems: An LSTM Approach Using Real-World Data

Maximum Power Point Tracking (MPPT) is essential for maximizing the efficiency of solar photovoltaic (PV) systems. While numerous MPPT methods exist, practical implementations often lean towards conventional techniques due to their simplicity. However, these traditional methods can struggle with rapid fluctuations in solar irradiance and temperature. This paper introduces a novel deep learning-based MPPT algorithm that leverages a Long Short-Term Memory (LSTM) deep neural network (DNN) to effectively track maximum power from solar PV panels, utilizing real-world data. The simulations of three algorithms—Perturb and Observe (P&O), Artificial Neural Network (ANN), and the proposed LSTM-based MPPT—were conducted using MATLAB (2021b) and RT_LAB (24.3.3) with an OPAL-RT simulator for real-time analysis. The data used for this study were sourced from NASA/POWER’s Native Resolution Daily Data of solar irradiation and temperature specific to Imphal, Manipur, India. The obtained results demonstrate that the LSTM-based MPPT system achieves a superior power tracking accuracy under changing solar conditions, producing an average output of 74 W. In comparison, the ANN and P&O methods yield average outputs of 57 W and 62 W, respectively. This significant improvement, i.e., 20–30%, underscores the effectiveness of the LSTM technique in enhancing the power output of solar PV systems. By incorporating real-world data, valuable insights into solar power generation specific to the selected location are provided. Furthermore, the outputs of the model were verified through real-time simulations using the OPAL-RT simulator OP4510, showcasing the practical applicability of this approach in real-world scenarios.