Power Modulation Enables Reduced Motor Power Requirement of Ankle Assistance Exosuit

Actuation efficiency is a significant consideration for soft exosuits. It has important significance for reducing system weight and improving the effectiveness of walking assistance. Inspired by a fact that desired assistance from exosuits varies over the gait stage, this study developed a power modulation unit (PMU) to adapt to human walking characteristics, aiming to reduce the power requirement of exoskeletons. The underlying principles consist of: 1) dividing the gait phase into assistance period and idle period by different gait characteristics, where the terminal stance phase is defined as the assistance period and other phases are defined as the idle period; 2) motor power is stored in elastic elements during the idle period with mechanical advantage; 3) an amplified power bursts during the assistance period. Preliminary experiments were carried out on an ankle exosuit with human users. Experimental results indicate that the proposed PMU can amplify the output power by 3.1 times while affecting little on wearers’ normal gait, which implies the potential of the developed PMU for use in wearable actuation systems. Note to Practitioners—This work was motivated by the trade-off between multipath assistance and lightweight actuation. That is, multipath assistance typically necessitates multiple motors, consequently adding to the overall weight of the system. In this work, we developed a PMU to adapt to human walking characteristics (motor power is stored in elastic elements during the idle period and released when needed), aiming to reduce the requirement for peak actuation power. Experimental results show that the PMUs can provide an average power amplification ability of 3.1 times and does not interfere with normal human gait. The developed PMU holds great potential in walking-assisted exosuits or other devices for human movement assistance.