Influence of Salinity Level on the Treatment Performance and Membrane Fouling of MBRs Treating Saline Industrial Effluent

This study investigated the potential impact of salinity levels on the treatment performance and membrane fouling of MBR seeded with sludge from saline industrial effluent treatment plants. A pilot-scale MBR received mixed saline industrial effluents at an organic loading rate (OLR) of 1.3 g COD/L·d and a feed-to-micro-organism (F/M) ratio of 0.33 g COD/g TSS. The effects of the variable salt concentrations of 5, 10, 20, and 25 g/L were investigated. The ranges of ammonia and total nitrogen (TN) concentrations were 22.2–26.3 mgN/L and 55.1–59.2 mgN/L, respectively. The MBR achieved promising results for chemical oxygen demand (COD) and biochemical oxygen demand (BOD), with removal ranges of 95.4–97.2% and 98.3–98.8%, respectively. The system provides 93.2–96.7% and 81.6–92.5% for ammonia and TN removal. Up to a 20 g/L salinity level, there were no significant effects on treatment performance, but 25 g/L significantly declined daily and specific COD removal load. Despite this, residual values at 25 g/L were better and met the Saudi standard for effluent discharge. This is due to membrane fouling which declined the flux rate with a spontaneous reduction of OLR and F/M ratio. The MBR system inoculated with high-salinity-adapted sludge could be managed to release treated effluent that meets Saudi disposal limits by modifying the F/M ratio via reducing the flux or increasing the mixed liquor suspended solid (MLSS) concentration.