Fixation of Tripotassium Citrate Flame Retardant Using a Sorbitol and Citric Acid Wood-Modification Treatment

Wood modification has been explored in various ways to enhance dimensional stability and reduce flammability, with a focus on environmentally friendly treatments to meet market demands. This study aimed to investigate the efficacy of new, potential fire-retardant materials. Specifically, the study examined the combination of tripotassium citrate (TPC), a water-soluble and bio-based fire retardant, with sorbitol and citric acid (SorCA), an eco-friendly thermosetting resin previously studied. While TPC is known to control combustion, its application in wood modification has not been thoroughly researched. To assess the fixation and flammability of these fire retardants, tests were conducted on Scots Pine (<i>Pinus sylvestris</i> L.), including chemical analysis, dimensional stability, mechanical properties, flame retardancy, and leaching tests. The combination of SorCA and TPC showed high weight percent gain (WPG) values; however, leaching and anti-swelling efficiency (ASE) tests revealed challenges in fixation stability. The dynamic mechanical properties were reduced, whereas the static strength values were in the same range compared with untreated wood. While TPC exhibited high flame retardancy prior to leaching, its efficacy diminished post-leaching, underscoring challenges in fixation and the need for improved retention strategies. Bunsen burner tests conducted on leached specimens indicated enhanced performance even under severe leaching conditions as per the EN 84:2020 procedure. However, cone calorimetry measurements showed less favorable outcomes, emphasizing the necessity for further investigation into optimizing TPC retention and enhancing treatment efficacy.