Numerical modeling of the transfer length of 17.8 mm (0.7 in) diameter prestressing strands in pretensioned members

Abstract The bond between concrete and reinforcing steel bars in reinforced concrete structures is crucial. Prestressing strands with a diameter of 17.8 mm (0.7 in) transfer higher compression per unit area than smaller strands, improving moment capacity and shear strength and extending the girder span. However, limited research on the bond performance of these 17.8 mm diameter prestressing strands has restricted their widespread use despite their advantages. This study presents a methodology to determine the transfer length of pretensioned members numerically. The influence of pretension force and bond strength on a 17.8 mm diameter strand was assessed through the validation of a finite element model using experimental results from a standardized pretensioned pull-out test. Analytical calculations using different code formulas were also conducted, encompassing strands of varying diameters. Our finite element analysis suggests that a 50.8 mm spacing between adjacent 17.8 mm diameter strands is applicable, ensuring there is no stress overlap in the transfer zones, which can lead to concrete cracking and reduced structural integrity. Existing code formulas, such as ACI 318–19 and AASHTO LRFD 9th edition, require longer transfer lengths when compared with the numerical results. The fib MC 2010 and EC2 formulas offer closer results to numerical results of smaller diameter strands but underestimate the transfer length for the 17.8 mm diameter strand. Therefore, improvements to code formulations may be necessary for more accurate transfer length predictions for this specific strand size.