FROM ENERGY INTENSITY TO SUSTAINABILITY: AN ANALYSIS OF TRENDS IN THE ALUMINIUM INDUSTRY

The article analyses trends in the aluminium industry from the point of view of sustainable development and energy efficiency. The significant impact of industrial enterprises on the environment is discussed, particularly, the high level of greenhouse gas emissions caused by energy consumption in aluminium smelting. Possibilities of reducing the negative impact due to the use of renewable energy sources, such as hydropower, as well as the implementation of energy-efficient practices, have been identified. A taxonomic analysis was used to assess the sustainable development of aluminium enterprises due to its advantage in identifying problems and directions for production improvement. The proposed method of analysis is based on the system of factors that influence the development of the industry and correspond to the concept of sustainable development. Based on the available data of the International Aluminium Institute (IAI), the analysis was carried out using the following factors: economic (volume of production, energy intensity of primary aluminium smelting, total energy consumption of production, labour productivity, impact of energy intensity on emissions), environmental (emissions of greenhouse gases and energy consumption of aluminium smelting using different energy sources), social (million hours reported worked, lost time accident rate, restricted work/medical treatment accident rate). Approbation of the proposed methodology on the example of international statistical data makes it possible to determine the biggest gaps in ensuring the sustainable development of aluminium industry production, including the use of various energy sources. Based on the results of the analysis, it was found that none of the factors used in monitoring the activities of aluminium producers reach the reference values. In the block of economic factors, the taxonomic indicator varies between 0.18 and 0.38 (the worst efficiency is observed in terms of total production volumes). Environmental factors have taxonomic values in the range of 0.07–0.36 (the largest reserves exist in ensuring the efficiency of energy consumption using hydropower, as well as reducing greenhouse gas emissions in the process of primary aluminium production). Among the social factors, the biggest problems are labour safety and lost working hours; as a result, the taxonomic indicator for this block is in the range of 0.04 - 0.33. The obtained results indicate the need for constant improvements in the production of aluminium, which is one of the main producers of greenhouse gases due to the high energy intensity of production. The proposed approach for conducting an analysis can be improved depending on the available statistical data and the goals of the analysis. In any case, it is valuable for obtaining information on the most critical areas in supporting the sustainable development of the industry.