CdSe nanoflower as a new near infrared-activated photocatalyst for remediation of pharmaceutical wastewaters

Photocatalysis using Near Infrared (NIR) light is a promising method for a wide range of applications from environmental remediation. For this purpose, a flower-like cadmium selenide (CdSe nanoflower), as a new promising NIR-activated photocatalyst, was synthesized through a hydrothermal process and characterized using various spectroscopic and microscopic analytical techniques. The characterization results indicated that CdSe nanoflower is classified as an n-type semiconductor with a direct band gap of 1.7 eV ( i.e. , E CB = −0.7 V and E VB = 1 V indicated by Mott-Schottky analysis), and crystallite size and strain of 9.17 nm and 2.14, respectively. In the presence of various scavengers, the production of reactive oxygen species decreases, resulting in lower degradation efficiency. To investigate the photocatalytic efficacy, sulfamethoxazole (SMX) was used as a model pollutant drug molecule. The optimization of the process revealed that over 98% of SMX could be degraded under NIR irradiation and optimal conditions (pH = 7, photocatalyst dosage = 0.1 g, SMX concentration = 40 mg/L, time = 60 min), where Lagergren model with a correlation coefficient of 0.9765 was the best kinetic model describing the empirical results. The study indicates that CdSe nanoflower can be reused and regenerated up to 7 times with a 12% decrease in performance and after 60 min of degradation, the TOC concentration decreased by 81% in the best conditions. Additionally, CdSe nanoflower showed photodynamic microbial inactivation efficacy against Escherichia coli ( E. coli ) and Staphylococcus aureus ( S. aureus ) under NIR light irradiation, where almost 95 and 99 % of bacteria was reduced in 20 min. The results of this work show CdSe nanoflower has great potential as a photocatalytic material with antimicrobial properties in the context of wastewater treatment and the management of microbial infections. • CdSe nanoflower was synthesized for the first time. • The optical properties revealed 1.7 eV band gap, suitable for NIR irradiation. • CdSe nanoflower showed photocatalytic activity under NIR irradiation. • CdSe nanoflower was employed for model pharmaceutical wastewater treatment.

Authors

Institutions

Publication Details

Journal
Materials Today Sustainability
Published
2024-08-20
DOI
https://doi.org/10.1016/j.mtsust.2024.100961
Citations
8
Primary Topic
Advanced Photocatalysis Techniques
Type
article
Field-Weighted Citation Impact
0.82
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

CdSe nanoflower as a new near infrared-activated photocatalyst for remediation of pharmaceutical wastewaters

Mohammad Tavakkoli Yaraki, Narges Elmi Fard, Hoda Pasdar
8 citations
Materials Today Sustainability
Advanced Photocatalysis Techniques
0.82
article

CdSe nanoflower as a new near infrared-activated photocatalyst for remediation of pharmaceutical wastewaters

Mohammad Tavakkoli Yaraki, Narges Elmi Fard, Hoda Pasdar
article en
8 citations

Abstract

Photocatalysis using Near Infrared (NIR) light is a promising method for a wide range of applications from environmental remediation. For this purpose, a flower-like cadmium selenide (CdSe nanoflower), as a new promising NIR-activated photocatalyst, was synthesized through a hydrothermal process and characterized using various spectroscopic and microscopic analytical techniques. The characterization results indicated that CdSe nanoflower is classified as an n-type semiconductor with a direct band gap of 1.7 eV ( i.e. , E CB = −0.7 V and E VB = 1 V indicated by Mott-Schottky analysis), and crystallite size and strain of 9.17 nm and 2.14, respectively. In the presence of various scavengers, the production of reactive oxygen species decreases, resulting in lower degradation efficiency. To investigate the photocatalytic efficacy, sulfamethoxazole (SMX) was used as a model pollutant drug molecule. The optimization of the process revealed that over 98% of SMX could be degraded under NIR irradiation and optimal conditions (pH = 7, photocatalyst dosage = 0.1 g, SMX concentration = 40 mg/L, time = 60 min), where Lagergren model with a correlation coefficient of 0.9765 was the best kinetic model describing the empirical results. The study indicates that CdSe nanoflower can be reused and regenerated up to 7 times with a 12% decrease in performance and after 60 min of degradation, the TOC concentration decreased by 81% in the best conditions. Additionally, CdSe nanoflower showed photodynamic microbial inactivation efficacy against Escherichia coli ( E. coli ) and Staphylococcus aureus ( S. aureus ) under NIR light irradiation, where almost 95 and 99 % of bacteria was reduced in 20 min. The results of this work show CdSe nanoflower has great potential as a photocatalytic material with antimicrobial properties in the context of wastewater treatment and the management of microbial infections. • CdSe nanoflower was synthesized for the first time. • The optical properties revealed 1.7 eV band gap, suitable for NIR irradiation. • CdSe nanoflower showed photocatalytic activity under NIR irradiation. • CdSe nanoflower was employed for model pharmaceutical wastewater treatment.

Materials Today SustainabilityVol. 28
Islamic Azad University, Science and Research Branch (IR), Islamic Azad University North Tehran Branch (IR), Macquarie University (AU)
Clean water and sanitation
Openalex Percentile: Top 32%
Advanced Photocatalysis Techniques
0.82
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.